Comparison MP 5 and MP P - RH 5 and RH 6 DolphinPaper Moisture meter
Comparison of the devices
- Moisture Predictor MP 5 and MP P for determining the absolute moisture in the volume and
- Sword sensor for humidity for stacks RH 5 and RH 6 Dolphin
![]() emco |
||||
---|---|---|---|---|
![]() MP P |
![]() MP 5 |
![]() RH 5 |
![]() Delphin |
|
Measured parameter | Moisture, temperature | Moisture, temperature | Humidity, temperature, dew point | Moisture, humidity, temperature, dew point |
Measuring range | 1 % - 15 % moisture (depending on type) |
1 % - 25 % moisture (depending on type) |
0 % - 100 % rH | 0 % - 100 % rH 0 - 130 g/m³ 2 - 30 %Ugl |
Reading resolution | 0.1 % | 0.1 % | 0.1 % | 0.1 % |
Measuring depth up to | 20 mm | 50 mm | Surrounding | Surrounding |
Operating temperature | 0 °C - 50 °C | 0 °C - 80 °C | -10 °C - 60 °C | -10 °C - 60 °C |
IR temperature measurement |
![]() |
![]() |
![]() |
![]() |
Measuring average |
![]() |
![]() |
![]() |
![]() |
Temperature compensation |
![]() |
![]() |
![]() |
![]() |
Auto log function |
![]() |
![]() |
![]() |
![]() |
Calibration lines | 21 | 21 | 2 | 7 |
Add new calibration lines |
![]() |
![]() |
![]() |
![]() |
Storage of data |
![]() |
![]() |
![]() |
![]() |
Measurement at the stationary roll |
![]() |
![]() |
![]() |
![]() |
Measurement at the running roll |
![]() |
![]() |
![]() |
![]() |
Data transfer |
![]() (optional) |
![]() |
![]() (optional) |
![]() |
Evaluation software |
![]() (optional) |
![]() |
![]() |
![]() |
Power supply | Battery | Accumulator | Battery | Battery |
Accessories | Device case with test plate and certificate, batteries | Device case with test plate and certificate, USB data interface, LogMemorizer software | Device case and certificate | Device case and certificate, LogMemorizer software |
Downloads / Documents
Product request
Further products

emco MP 5 – Moisture Predictor
The emco MP 5 Moisture Predictor is a universal measuring system for the fast and non-destructive moisture determination of paper, paperboard and pulp on the stationary and running roll through the packaging with a measuring depth of 50 mm.

emco MP P – Moisture Predictor
The emco MP P Moisture Predictor is a universal measuring system for the fast and non-destructive moisture determination of paper, paperboard and pulp in stacks through the packaging with a measuring depth of 20 mm.

emco Dolphin P – Sword sensor for humidity and moisture of paper
Sword sensor for mobile determination of relative humidity, temperature, dew point and moisture in paper stacks and environments

emco RH 5 – sword sensor for humidity, temperature and dew point
Sword sensor for mobile determination of relative humidity, temperature and dew point in paper stacks and environments

emco PMSA – Single Paper Sheet Moisture Analyzer
Moisture sensor for determination of water content of single paper sheets.

emco PMM – Paper Management Moisture
The device system emco PMM – Moisture determines the equilibrium moisture content in printing products and provides the verifiable comparison to a target moisture.